Ease Release™ 2300
Ease Release 2300 is a high performance heavy-duty silicone release similar in characteristics to Ease Release 300. It is designed to release molded parts from deep draw molds. Ease Release 2300 is formulated to provide excellent release of polyurethane elastomers. Ease Release 2300 is effective on all mold surfaces such as steel, aluminum, epoxy, urethane, and RTV silicone rubber mold materials.
Features:
- Ease Release 2300 is easy to apply, fast drying and effective over a broad temperature range from 70°F to 500°F.
- Excellent release
- Glossy finish
- Reduced mold maintenance and down time
- Reduced mold build-up
- Precise duplication of mold details
- Increased productivity
Application:
- Thoroughly clean your mold with Mold Cleaner 2508 or any suitable cleaner to remove all traces of previous coating and oils.
- Apply Ease Release 2300 using aerosol spray or spray equipment for bulk grades. Hold the can or spray gun 6 to 8 inches from the mold surface to ensure a light even coating. When the molds are new or have been blasted with an abrasive, “season” the mold by applying a heavy coating of release. Heat the mold to process temperature, then wipe the excess with a rag and reapply a light coating of Ease Release 2300 before regular molding.
- Ease Release 2300 is fast drying and requires no baking during the normal molding process.
- Reapply a light coating before each molding.
Finishing:
Thorough cleaning of molded parts is required prior to staining, painting, or bonding. For suggested cleaning procedures, consult a technical representative.
Properties:
| Ease Release | Weight/Gallon | Solvent Carrier | Drying Rate | Flammable | Wetting Quality | Safety Data Sheet |
|---|---|---|---|---|---|---|
| Ease Release 2300 (aerosol) | * | Dichloromonofluoroethane, Dimethylmethane Butane | Very Fast | No | Excellent |
Download SDS 
|
| Bulk Products | Weight/Gallon | Solvent Carrier | Drying Rate | Flammable | Wetting Quality | Safety Data Sheet |
| Ease Release 2305 | 6.0 lbs | Petroleum Hydrocarbons | Fast | Yes | Excellent |
Download SDS
|
Related Documents
Caution:
- Use adequate protection when handling any release solvent systems.
- Skin contact my cause dryness.
- Wear safety glasses or their equivalent to prevent eye injury.
- Avoid inhalation of excessive amount of solvent vapor.
Availability
All Mann Products are available from Smooth-On's global network of quality full-line distributors. Many of the products are available in aerosol and bulk in various solvent systems…
USA Distributors Call for International Distributors
Technical Service:
Technical Service specialists are available to assist you with your mold release requirements. They can recommend specific formulations, cleaning procedures, and equipment to meet the particular needs of individual customers. For technical assistance.. Contact Us