Ease Release™ 2910
Ease Release 2910 is a superior release agent for casting complex designs using polyurethane elastomers. The 2910 is a heavy-duty silicone based product in a solvent carrier that gives a high gloss surface finish on the molded parts. This product also releases compression molded Thiokol rubbers, EPDM and other synthetic elastomers. Ease Release 2910 release agent works on aluminum, chrome, epoxy, and polyurethane molds.
Features:
- Ease Release 2910 is easy to apply, fast drying and effective over a broad temperature range from 70°F to 500°F.
- Ease Release 2910 provides excellent release, excellent surface finish, precise duplication of mold details and dimensions with minimum mold maintenance and down time for increased productivity.
Application:
- Thoroughly clean your mold with Mold Cleaner 2508 or any suitable cleaner to remove all traces of previous coating and oils.
- Apply Ease Release 2910 using aerosol spray for bulk grades. Hold the can or spray gun 6 to 8 inches from the mold surface to ensure a light even coating. When the molds are new or have been blasted with an abrasive, “season” the mold by applying a heavy coating of release. Heat the mold to process temperature, then wipe the excess with a rag and reapply a light coating of Ease Release 2910 before regular molding.
- Ease Release 2910 is fast drying and requires no baking during the normal molding process.
- Reapply a light coating before each molding.
Finishing:
Parts molded with Ease Release 2910 must be sanded or machined to remove the shiny surface before painting or bonding. For suggested cleaning procedures, consult a technical representative.
Properties:
| Ease Release | Weight/Gallon | Solvent Carrier | Drying Rate | Flammable | Wetting Quality | Safety Data Sheet |
|---|---|---|---|---|---|---|
| Ease Release 2910 (aerosol) | * | Dimethyl Ether/1,1 -difluoroethane | Very Fast | No | Excellent |
Download SDS 
|
| Bulk Products | Weight/Gallon | Solvent Carrier | Drying Rate | Flammable | Wetting Quality | Safety Data Sheet |
| Ease Release 2910-5 | 6.0 lbs | Petroleum Hydrocarbons | Fast | Yes | Excellent |
Download SDS
|
Related Documents
Caution:
- Use adequate protection when handling any release solvent systems.
- Skin contact my cause dryness.
- Wear safety glasses or their equivalent to prevent eye injury.
- Avoid inhalation of excessive amount of solvent vapor.
Availability
All Mann Products are available from Smooth-On's global network of quality full-line distributors. Many of the products are available in aerosol and bulk in various solvent systems…
USA Distributors Call for International Distributors
Technical Service:
Technical Service specialists are available to assist you with your mold release requirements. They can recommend specific formulations, cleaning procedures, and equipment to meet the particular needs of individual customers. For technical assistance.. Contact Us