Ease Release 400 is a highly efficient release agent designed to release polyurethane elastomers, Thiokol rubbers, EPDM and other synthetic elastomers from aluminum, chrome, epoxy, polyester, rubber and steel molds.
Finished parts must be abraded prior to any post mold finishing such as bonding or painting. For suggested cleaning procedures, consult a technical representative.
|Ease Release||Weight/Gallon||Solvent Carrier||Drying Rate||Flammable||Wetting Quality||Safety Data Sheet|
|Ease Release 400 (aerosol)||*||Dimethyl Ether/1,1 -difluoroethane||Very Fast||No||Excellent||Download SDS|
|Bulk Products||Weight/Gallon||Solvent Carrier||Drying Rate||Flammable||Wetting Quality||Safety Data Sheet|
|Ease Release 405||6.0 lbs||Petroleum Hydrocarbons||Fast||Yes||Excellent||Download SDS|
|Ease Release 407||6.4 lbs||Petroleum Hydrocarbons||Very Slow||Combust.||Good||Download SDS|
Technical Service specialists are available to assist you with your mold release requirements. They can recommend specific formulations, cleaning procedures, and equipment to meet the particular needs of individual customers. For technical assistance.. Contact Us