Ease Release 500

Ease Release 500 is a TEFLON™-like dry film mold release (and dry lubricant) that contains no silicones, oils or wax. Ease Release 500 is non-migrating and non-staining. It is effective and improves efficiency in many molding processes including injection, compression, transfer, vacuum form and die cast molding.


  • Fast drying
  • Effective over a broad temperature range from 70°F to 400°F
  • Easy to apply
  • Non staining, non migrating
  • Inert with outstanding thermal and chemical stability

Ease Release 500 provides:

  • Excellent release
  • Matte surface finish on molded parts
  • Ease of post finishing molded parts

Application - Processing Using Metal Molds

  • Thoroughly clean your mold with Mold Cleaner 2508 or any suitable cleaner to remove all traces of previous coating and oils.
  • Apply Ease Release 500 using aerosol spray for bulk grades. Hold the can or spray gun 6 to 8 inches from the mold surface to ensure a light even coating. When the molds are new or have been blasted with an abrasive, “season” the mold by applying a heavy coating of release. Heat the mold to process temperature, then wipe the excess with a rag and reapply a light coating of Ease Release 500 before regular molding.
  • Ease Release 500 is fast drying and requires no baking during the normal molding process.
  • Reapply a light coating before each molding.

CAUTION: Heating this product to temperatures above 500°F will create fumes that can cause flu like systems. Use with adequate ventilation.


Thorough cleaning of molded parts with Isopropyl Alcohol may be required prior to staining, painting, or bonding. For suggested cleaning procedures, consult a technical representative.

Application – Room temperature processing using below variables

- Urethane Rubber Urethane Resin Silicone Rubber Epoxy Resin
Steel Does not work Good Release Good Release Good Release
Urethane Rubber Good Release Good Release Good Release Does not work
Silicone Rubber Good Release Good Release Good Release Good Release
Ease Release Weight/Gallon Solvent Carrier Drying Rate Flammable Wetting Quality Safety Data Sheet
Ease Release 500 (aerosol) * Dichloromonofluoroethane, Dimethylmethane Butane Very Fast No Excellent Download SDS

WARNING: At temperatures above 500°F, fumes are evolved which, if inhaled, can cause flu like systems. Use with adequate ventilation.

  • Use adequate protection when handling any release solvent systems.
  • Skin contact my cause dryness.
  • Wear safety glasses or their equivalent to prevent eye injury.
  • Avoid inhalation of excessive amount of solvent vapor.
Technical Service:

Technical Service specialists are available to assist you with your mold release requirements. They can recommend specific formulations, cleaning procedures, and equipment to meet the particular needs of individual customers. For technical assistance.. Contact Us