Ease Release 700

Ease Release 700 is a general purpose release agent. Ease Release 700 is designed to release polystyrene, polyethylene, wax, synthetic rubber, acrylics, phenolic, melamine and metal castings from aluminum, chrome, epoxy, polyester, rubber, and steel molds. Ease Release 700 is also effective as a surface lubricant for assembling plastic and rubber components.


  • Easy to apply
  • Fast drying
  • Effective over a broad temperature range from 70°F to 500°F

Ease Release 700 provides:

  • Excellent release
  • Excellent surface finish
  • No build-up on mold surfaces
  • Reduced mold maintenance and down time
  • Greater productivity


  • Thoroughly clean your mold with Mold Cleaner 2508 or any suitable cleaner to remove all traces of previous coating and oils.
  • Apply Ease Release 700 using aerosol spray. Hold the can 6 to 8 inches from the mold surface to ensure a light, even coating. When the molds are new or have been blasted with an abrasive, “season” the mold by applying a heavy coating of release. Heat the mold to process temperature, then wipe the excess with a rag and reapply a light coating of Ease Release before a regular molding.
  • Ease Release 700 is fast drying and requires no baking during the normal molding process.
  • Reapply a light coating before each molding.


Thorough cleaning of molded parts with Isopropyl Alcohol may be required prior to staining, painting, or bonding. For suggested cleaning procedures, consult a technical representative.

Ease Release Weight/Gallon Solvent Carrier Drying Rate Flammable Wetting Quality Safety Data Sheet
Ease Release 700 (aerosol) * Dimethyl Ether/1,1 -difluoroethane Fast Yes Excellent Download SDS

WARNING: At temperatures above 500°F, fumes are evolved which, if inhaled, can cause flu like systems. Use with adequate ventilation.

  • Use adequate protection when handling any release solvent systems.
  • Skin contact my cause dryness.
  • Wear safety glasses or their equivalent to prevent eye injury.
  • Avoid inhalation of excessive amount of solvent vapor.
Technical Service:

Technical Service specialists are available to assist you with your mold release requirements. They can recommend specific formulations, cleaning procedures, and equipment to meet the particular needs of individual customers. For technical assistance.. Contact Us